-
Select the Network icon on your Windows NT desktop.
-
Click the right mouse button and click on Properties on the popup menu.
-
Click on the Services tab.
-
Click one on Remote Access Service in the list, then click on the Properties
button.
-
You will see a screen like the one below.
-
(A) Click on the Configure button to configure the modem to dial
out and/or receive calls.
-
(B) Click on the Network button to configure the RAS Network configuration.
-
By default Port Usage should be set to Dial out only.
-
If you use Windows NT to receive calls this should be set to Dial out and
Receive calls. If unsure of this please check
with your Network Administrator.
-
Click OK.
(A)
-
Usually TCP/IP should be the only Dial out Protocol checked. If
unsure of this please check with your Network Administrator if other protocols
are required for other Dial-Up Networking connections.
-
Click OK.
(B)
-
Click OK on Remote Access Setup.
-
Click OK on Network.
-
Windows NT will review the RAS settings and tell you that you need to restart
the computer.
Click here to go back to back to Configuring NT 4.0
Dial-Up Network
|